NSE7_EFW-7.2 PASS4SURE PDF & NSE7_EFW-7.2 CERTKING VCE & NSE7_EFW-7.2 ACTUAL TEST

NSE7_EFW-7.2 Pass4sure Pdf & NSE7_EFW-7.2 Certking Vce & NSE7_EFW-7.2 Actual Test

NSE7_EFW-7.2 Pass4sure Pdf & NSE7_EFW-7.2 Certking Vce & NSE7_EFW-7.2 Actual Test

Blog Article

Tags: NSE7_EFW-7.2 Customizable Exam Mode, NSE7_EFW-7.2 Exam Vce Format, NSE7_EFW-7.2 Exam Simulations, NSE7_EFW-7.2 Reliable Test Sims, Valid NSE7_EFW-7.2 Test Pdf

If you're looking to advance your Fortinet career, Fortinet NSE7_EFW-7.2 Exam can help you achieve that goal. This certification exam is essential to assist professionals in every aspect of their field. However, studying for the exam can be challenging, and finding reliable study materials can be difficult. This is where Actual4dump comes in.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
Topic 2
  • Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 3
  • Central management: The topic of Central management covers implementing central management.
Topic 4
  • Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 5
  • VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.

>> NSE7_EFW-7.2 Customizable Exam Mode <<

Fortinet NSE7_EFW-7.2 Questions To Complete Your Preparation

Our company's staff conducted a rigorous analysis of the user's characteristics, so our staff created these three versions of our NSE7_EFW-7.2 study guide for you to choose: the PDF, Software and APP online. The PDF verson can be printable. And the Software version of our NSE7_EFW-7.2 Practice Engine can simulate the real exam and apply in Windows system. App online version can apply to all kinds of the eletronic devices. Our NSE7_EFW-7.2 exam questions are always thinking about customers and hopes that you can be satisfied in all aspects.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q59-Q64):

NEW QUESTION # 59
You want to configure faster failure detection for BGP.
Which parameter should you enable on both connected FortiGate devices?

  • A. Graceful-restart
  • B. Ebgp-enforce-multihop
  • C. bfd
  • D. Distribute-list-in

Answer: C

Explanation:
BFD (Bidirectional Forwarding Detection) is a protocol that provides fast failure detection for BGP by sending periodic messages to verify the connectivity between two peers. BFD can be enabled on both connected FortiGate devices by using the command set bfd enable under the BGP configuration.


NEW QUESTION # 60
Refer to the exhibit.

which contains a partial configuration of the global system. What can you conclude from this output?

  • A. NPs and CPs arc disabled
  • B. NPs and CPs are enabled
  • C. Only CPs arc disabled
  • D. Only NPs are disabled

Answer: B

Explanation:
The configuration output shows various global settings for a FortiGate device. The terms NP (Network Processor) and CP (Content Processor) relate to FortiGate's hardware acceleration features. However, the provided configuration output does not directly mention the status (enabled or disabled) of NPs and CPs.
Typically, the command to disable or enable hardware acceleration features would specifically mention NP or CP in the command syntax. Therefore, based on the output provided, we cannot conclusively determine the status of NPs and CPs, hence option D is the closest answer since the output does not confirm that they are enabled.


NEW QUESTION # 61
Refer to the exhibit, which contains a TCL script configuration on FortiManager.

An administrator has configured the TCL script on FortiManager, but the TCL script failed to apply any changes to the managed device after being run.
Why did the TCL script fail to make any changes to the managed device?

  • A. The TCL procedure run_cmd has not been created.
  • B. The TCL script must start with #include.
  • C. There is no corresponding #! to signify the end of the script.
  • D. The TCL procedure lacks the required loop statements to iterate through the changes.

Answer: A


NEW QUESTION # 62
Which ADVPN configuration must be configured using a script on fortiManager, when using VPN Manager to manage fortiGate VPN tunnels?

  • A. Configure IP addresses on IPsec virtual interlaces
  • B. Set protected network to all
  • C. Disable add-route on hub
  • D. Enable AD-VPN in IPsec phase 1

Answer: D

Explanation:
To enable AD-VPN, you need to edit an SD-WAN overlay template and enable the Auto- Discovery VPN toggle. This will automatically add the required settings to the IPsec template and the BGP template. You cannot enable AD-VPN directly in the IPsec phase 1 settings using VPN Manager.


NEW QUESTION # 63
Exhibit.

Refer to the exhibit, which shows the output from the webfilter fortiguard cache dump and webfilter categories commands.
Using the output, how can an administrator determine the category of the training.fortinet.com am website?

  • A. The administrator can look up the hex value of 34 in the second command output.
  • B. The administrator must add both the Pima in and Iphex values of 34 to get the category number
  • C. The administrator must convert the first three digits of the IP hex value to binary
  • D. The administrator must convert the first two digits of the Domain hex value to a decimal value

Answer: A

Explanation:
Option B is correct because the administrator can determine the category of the training.fortinet.com website by looking up the hex value of 34 in the second command output. This is because the first command output shows that the domain and the IP of the website are both in category (Hex) 34, which corresponds to Information Technology in the second command output1.
Option A is incorrect because the administrator does not need to convert the first three digits of the IP hex value to binary. The IP hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2.
Option C is incorrect because the administrator does not need to add both the Pima in and Iphex values of 34 to get the category number. The Pima in and Iphex values are not related to the category number, but to the cache TTL and the database version respectively3.
Option D is incorrect because the administrator does not need to convert the first two digits of the Domain hex value to a decimal value. The Domain hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2. Reference: =
1: Technical Tip: Verify the webfilter cache content4
2: Hexadecimal to Decimal Converter5
3: FortiGate - Fortinet Community6
4: Web filter | FortiGate / FortiOS 7.2.0 - Fortinet Documentation7


NEW QUESTION # 64
......

If you are finding a study material to prepare your exam, our material will end your search. Our NSE7_EFW-7.2 exam torrent has a high quality that you can’t expect. I think our NSE7_EFW-7.2 prep torrent will help you save much time, and you will have more free time to do what you like to do. I can guarantee that you will have no regrets about using our NSE7_EFW-7.2 Test Braindumps When the time for action arrives, stop thinking and go in, try our NSE7_EFW-7.2 exam torrent, you will find our products will be a very good choice for you to pass your NSE7_EFW-7.2 exam and get you certificate in a short time.

NSE7_EFW-7.2 Exam Vce Format: https://www.actual4dump.com/Fortinet/NSE7_EFW-7.2-actualtests-dumps.html

Report this page